Відео

Great trick using the level as a guide for making a straight edge on the table saw. Never seen that one before. Thanks!

a cheeky comment on the US measurement system. we have $1, $10, $100, etc. you have shilling, pence, pound. tell you what: you change your monetary system, we will work a little harder on the measurements. i suggest you clean up you own mess before you chide the US on dealing with a baby you gave us in the first place.

a cheeky comment on US measurement system was made. did you forget that that system came from ... England!

Cat milk 😋

I predict a missing finger in your future.

When you're saying you don't have a table router - isn't there actually one in the bottom of the shot? (where you could mount your hand router) =)

Great video, If you have a table planer send the slats through before you round over the edge. Stainless steel screws always add more value then cost, deck screws rust out creating failure. Not sure if you mention picking boards without knots is more important then straight boards when cutting them up. I'm sure this imformation is well known although helpful to few is it's purpose. You definitely made the day's saw dust quota and for that respect.

Really entertaining and good tips! It's good to see it isn't always perfect sailing for everyone.

Man, I bet if you made templates, you could sell just the templates without having to assemble anything! But, that's just me thinking how to capitalize from a good idea like you have here. You could hire it out to someone with big C&C's and have all your curves absolutely perfect. Thank me later ;)

I sure wish you had a purchaseable set of plans for this for yhose few of us who read "carpentry for dummies", I'm sincere, I'd pay $15-$20 for a good set of plans. 🤷‍♀️

I'm sorry Sir... but roundovers are always necessary! 🤣 awesome project!

kids help dad on the skits ? <3 wish i had a dad like that.

You can't mount that router under the sliding arm on your table saw??? What is that hole and mounting holes for?

Chicken noise intensifies*

freaking awesome

Nice

God bless you for not stopping. We all have days like that. I have more than most due to my illness. So, in short, thank you for making me feel 'normal'.

Do you sell these? Nothing on your website but the burnstock-Olson bench.

I appreciate you buddy! I'm glad to see the heat and humidity isn't just my issue! Love your content and love the way you do it. Stay you brother.

"Slave"

Love the sense of humor

You’re freaking awesome dude! I love your UA-cam channel and your ideas.

I'm in Louisiana. I put a/c in my little 8x12 shop.

I lose my pencils all the time. Then I look in my shirt pocket.

For those long pieces, you should build an infeed table too.

I bought some at Lowe's once that were 1 3/8 thick. I was pissed!

Loving your videos dude! New subscriber too!

Fun video. Good video. Sound video and lighting are spot on. Nice walnut mallet!!

Awesome work, dude! Really well done!!! 😃 Plant some peppers and seasoning there!!! (Sorry, I'm hungry. 😬) Anyway, stay safe there with your family! 🖖😊

You're doing great, imo. I love your style. But you could clean up your audio (i.e. rain, a/c and any other constant type of background noise) by learning to pinpoint it and lower the volume to that specific area. I have no freakin' clue what it's called, but there are tons of videos on how to do it. Just search for cleaning up audio and you should find it. Regardless, keep doing what you're doing. Love it!

12:24 I think it was a David Pachuto video where i got this from, but he was gluing up a segmented piece and he gave credit to someone else for this, but you glue up the two halves of the segmented piece (in this case, three pieces) and then once dried, you lay the edges that need to comnect flat on a piece of sandpaper stuck to a flat surface and just sand until the entire end is flush with no gaps. If you do this to both pieces, 5hey fit perfectly. I'm sure there is a way to get measurements perfect so it always just works, but his solution seems like the issue I'd run into every time as not something I usually do. Hopefully that description made sense.

That miter saw form! Chef's kiss 😅

Brought to you by Heat and Humidity! 😂 All my projects have been sponsored by them too! They're not the best to work with, but they are very loyal! 😅

I really need to start squaring edge first before end. I'd never rhought about it. I usually do ends first and cut to length as I have a contractors saw and the shorter lengths are easier to work with. I'll have to change that. Or at least cut a bit long, do edge, then do final end cuts.

Everytime you said 'earplugs' i thought you were going to say something you didn't want kids to hear. 😂 "Earmuffs" 😅

0:09 Don't show it yet! 😂

Another video/project so soon after last one? We're getting spoiled!

Nice Project. I do have some additional info to update concerning the use of pressure-treated lumber. This is from research by Oregon State University. "The safety of pressure-treated lumber for raised bed gardens has been examined by several researchers. From what I've seen, the consensus is that the chemicals do leach out of the wood into the soil and are uptaken by the plants in very small amounts. However, I haven't seen any research that suggests the level of the chemicals is significant enough to be of concern for human health. Of course, the primary concern with using pressure-treated wood in raised-bed gardens has been with the arsenic in CCA- (chromated copper arsenate) treated wood. This publication from Pennsylvania State University does a good job describing the risks of using both CCA-treated wood as well as ACQ- (alkaline copper quaternary) treated wood: Environmental Soil Issues: Garden Use of Treated Lumber. With regards to CCA, they state, "Although the plant and human health risks from garden uses of CCA-treated lumber appear to be extremely small, there are steps gardeners can take to further reduce any such risks." One of the steps they recommend is to use wood treated with ACQ - "This is an alternative wood-treatment chemical that contains no arsenic, chromium, or any other chemical considered toxic by the EPA." If you are shopping for treated lumber nowadays, I don't think you'll find CCA-treated material in the home centers anyway since its use was restricted by the EPA in 2004. It will be more likely be ACQ or some other chemical."

I have no planner either, one thing I have found to get square edges is cutting my lengths first, say 24in since my table saw has a short fence and it's hard to clamp a long straight edge to the fence. Hope that helps someone 🙏

Pro tip! Your children's tv remotes have triple a's. At least two! Thanks for demonstrating proper miter saw posture :)

Since you asked...One improvement I would make, Don't Change A Thing!!! Love it the way it is!

Mate, please listen to this criticism/feedback. And it is not BS. Honest. Your lighting is absolutely fine, audio is fine, the gaffs that you keep in when editing is one of the things that define you and Burnstock Woodworking. It make you unique and amusing. Do not do yourself down, there is nothing wrong with your content, presentation or editing skills. We already have scripted channels (731, Wittworks, Fix this Build That etc etc (nothing wrong with them, I subscribe to them all and like them a lot) You are different, stay different and be true to you. Applause from across the pond. 👏👏👏👏👏👏👏👏👏👏

Nice job mate looks wicked. Love the hexagon Idea must say was something different we just need more content and the lighting which you covered. On side note i am the dad that would steal kids toy batteries especially the really annoying one's 😮😮🤣🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

Yer not pretty to watch, sorry won't be subbing

I think you need to add a bit of humour..............😂😂. Excellent stuff bro

I've only recently found and subbed to your channel. I really enjoy the raw already that you take to your videos. Combine it with the personality on camera, and you've got a great combination.

Great video, thanks for sharing.

Don’t worry bout that walkin around the shop for things, it’s good for you. I miss my big shop that I had to walk back and forth through all day. Now in a small shop I hardly burn any calories like I used to while working.

Maybe don't do wood working video anymore. I think you have bigger problems in life . Take a chill pill . Let the anger go not worth getting upset for every thing. Fix yourself first brother before continuing with your channel. I know why you do a video once every 6 months. Remember let the anger go

Looks good, but projects like like have a lot of wasted wood.